Pages: [1]

Author Topic: need help with a 7.5 rear end  (Read 5044 times)

ralph1979

  • Rookie
  • **
  • Posts: 128
  • why settle for 2nd when you could have 1st
    • View Profile
need help with a 7.5 rear end
« on: August 18, 2009, 09:03:04 PM »
 >:( I'm pulling apart a 7.5 rear.  Any suggestion in pulling out the one axle with a bent c clip and the spool wont pull over the axle far enough to get the c clip out.Is there any possible way to do this without destroying the axle or carrier?
Logged
attitude is the little thing that makes a big difference

ralph1979

  • Rookie
  • **
  • Posts: 128
  • why settle for 2nd when you could have 1st
    • View Profile
Re: need help with a 7.5 rear end
« Reply #1 on: August 21, 2009, 12:50:02 PM »
got it apart with the help of torches :)
Logged
attitude is the little thing that makes a big difference

jjracing0

  • Newbie
  • *
  • Posts: 75
    • View Profile
Re: need help with a 7.5 rear end
« Reply #2 on: August 23, 2009, 12:20:48 PM »
Is there any other way, i've got 2 to do?
Logged
dirt is for racing

chevyheavy99

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: need help with a 7.5 rear end
« Reply #3 on: August 24, 2009, 06:39:41 AM »
Yes, stop using Clip type rear ends, and use a mini spool.
Logged

ralph1979

  • Rookie
  • **
  • Posts: 128
  • why settle for 2nd when you could have 1st
    • View Profile
Re: need help with a 7.5 rear end
« Reply #4 on: August 25, 2009, 08:54:57 PM »
the mini spool i was using i still needed to use the c clip. Do they make a mini spool that you dont need c clips for the 7.5 rear ??? i know they make them for the 8.5 rear
Logged
attitude is the little thing that makes a big difference

racindave

  • Rookie
  • **
  • Posts: 707
    • View Profile
Re: need help with a 7.5 rear end
« Reply #5 on: August 25, 2009, 09:18:30 PM »
yes  they do but its expensive you can get a full spool or a c clip eliminator both ways are costly but it can be done
Logged

Pages: [1]