Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - sharpd12

Pages: [1] 2
1
Classified Ads / Street/hobby stock roller
« on: October 18, 2020, 02:53:50 PM »
Have a nice Camaro pure/hobby/street stock. No jacking bolts. 2x3 chassis after front clip. Can run heim front shocks or stock location. Will only cone with a steel Camaro roof and the decking as far as the body goes, has new leaf spring sliders in the back but can be put back to shackles if need be. Leaf springs only have a handful of nights on them and weights off them 99% of the time it wasn’t on the track. Was gonna keep it and run as a hobby but don’t even have time to run my street stock lately. Will come with couple sets of headers, any extra suspension parts I have for it. 9” rear, no gear unless you have a set to give me on trade with it. Has all brake and fuel lines and fuel cell. Will be a roller if bought at asking price other wise you will need to supply wheels to transport it home(4.75) message me for details or any questions. Open to some trades just ask me and I’ll let you know.

Everything that I have in it goes. Extra leafs. Shocks. Control arms. Headers. Exhaust pipes for the chassis. Extra rearend housing.
Livonia NY 14487
Call or text 3153233174
Can text pics
900 obo need gone before snow falls

DO NOT WASTE MY TIME PLEASE!

2
Classified Ads / ISO Chrysler leafs
« on: January 05, 2020, 07:49:53 PM »
Looking for a set of Chrysler leaf springs. Used is fine. Looking for something someone may be tossing out. I am swapping from chevy springs and looking for a set of Chrysler’s just for mock up.
I’m in Livonia but I’m in Rochester throughout the week. Anywhere local to me I can pick up whenever.
Call or text 315-323-3174
Thanks,
Dakota

3
The Tech Barn / Corner misfire
« on: July 25, 2019, 06:45:45 AM »
Having a problem with my street stock. Going into corner and car just starts to stumble and fall on face until back going straight. Doesn’t make difference if I feather throttle,hold to floor, or even throw it in and try coasting through as mush if the turn that I can. I adjusted float so there just a trickle with a little rocking of the car. Any ideas or help would be great!
Thank you in advance

4
The Tech Barn / Vortec heads cut for more valve lift.
« on: November 05, 2018, 09:03:59 PM »
Who in Rochester NY can take my stock vortec heads and cut the seats and guides so I can run a bigger cam. Also looking to have set up for screw in studs with guide plates.

5
Racing Discussion / Boy Dying From Cancer Needs Racing Stickers
« on: August 19, 2018, 10:18:49 PM »
http://hudsonvalleycountry.com/boy-dying-from-cancer-needs-racing-stickers/

Let’s try to help this poor little guy out! Check out the article if you haven’t read about him yet, search it online. Let’s give this boy what he wants before he’s gone.

6
The Tech Barn / Rearend width help please!!
« on: November 29, 2017, 08:57:12 PM »
Looking into getting a floater rearend for my Camaro Street stock. I run chevy springs in it. Wondering on what width I should go with when ordering/looking

7
Racing Discussion / Traditional street stocks?
« on: September 26, 2017, 09:25:42 PM »
Any one know what the term traditional street stocks mean that is said to be returning to land of legends? Just wondering where the class is headed. Because it's far from traditional street stocks right now, and before I go buy a late model transmission that comes with a car with a Camaro clip to compete I would like to know what direction it's headed if anyone knows.

8
The Tech Barn / 8 inch Hoosier street stock tire pressure
« on: June 07, 2017, 09:16:08 PM »
Wondering what guys are running for psi on a new set of 8 inch Hoosier street stock tires. 27.5/8/15
Leaf spring Camaro car.

9
Racing Discussion / Looking for a sa2010 or newer helmet
« on: May 25, 2017, 07:36:24 AM »
Need a updated helmet asap so I can race this week. Call or text if you have anything please. Rochester area
3153233174

10
Racing Discussion / ATTENTION: Canandaigua pure/street/pro stock teams!
« on: October 30, 2016, 01:47:30 PM »
STREET/PRO STOCK/PURE STOCKS at CMP
We have scheduled a drivers meeting on SATURDAY NOVEMBER 5TH, 11am, at the Moose Lodge 305 Ontario St Ext, Canandaigua, NY 14424
The purpose of this meeting is to agree on what class(es) of full fendered cars we will be running at Canandaigua Motorsports Park in 2017. Our goal at CMP is to have a competitive class of full fendered cars, with a good car count, so we can establish a good payout.
If you want to run a full fendered Stock at CMP in 2017, please attend this meeting so we can agree on what is best for drivers and track.

Please spread the work!

11
The Tech Barn / Super victor 2 vs 2V sportsman victor jr
« on: July 20, 2016, 10:42:32 PM »
Opinions on going with a 4bbl intake or a 2bbl intake when running a 4412 carb.

Thoughts? Facts? Opinions?

12
The Tech Barn / Power valve block off
« on: June 19, 2016, 09:04:02 AM »
Hey everyone. I just took apart a carb (4412) that I had picked up as a spare. Going through it and found a power valve block off in place of the valve. Anyone have any info on these and what they do and if there is pros or cons

13
The Tech Barn / Looking for base set up help on leafspring camaro
« on: December 28, 2015, 01:25:00 PM »
Hey I'm looking to see if anyone has any suggestions what to run for a base spring set up in a camaro at canandaigua. What length and rate in front and what rate in the rear.

Thank you!

14
Racing Discussion / Pure stock class next year?
« on: August 24, 2015, 03:58:27 PM »
Just wondering if anyone has heard anything about the pure stock class sticking around at canandaigua next year or if they are just gonna run pro stocks? Any info would be great as I am trying to start to get prepared for next season.

15
Racing Discussion / Canandaigua photos
« on: May 24, 2015, 03:37:46 PM »
Looking for a link to the website for the camera person in turn 4.

Pages: [1] 2